One of the major factors that separates a good piece of woodworking from a mediocre one, is how cleanly it has been constructed. Nothing will destroy the look of a finished piece of furniture more than tearout. The rough edges can be avoided if you pay attention to how would fibres can react to different types of cutting.
On the table saw, tearout occurs mostly when the blade exits the stock and breaks the wood fibres when it should be cutting them. As a result of this breakage, splinters will show up on the underneath, the back corner, and the back edge of your piece of timber. This damage is most obvious when crosscutting a piece of timber rather than ripping one. However, tearout is easy to eliminate.
Dewalt 18V Cordless
It is vitally important that the blade you are using is sharp and clean, a dull blade, or one that has clogged teeth, will consistently produce poor quality cuts. If you are crosscutting a piece of timber make sure that you were using the correct crosscutting blade, as these blades have staggered teeth which score the fibres before cutting through the stock.
The height of the blade can also be an issue. For safety reasons the blade should project above the surface of timber about the height of one of the teeth. However, a low blade can lift the fibres away from the timber resulting in tearout. If you raise the blade slightly higher than that normally recommended it forces the saw to press the fibres into the surface which results in a cleaner cut.
The table saw in search which surrounds the blade slot can also cause tearout if it is too wide. If there is too much began around the blade it creates an unsupported surface for the timber you are cutting. You should purchase or construct a zero tolerance insert to ensure that timber is fully supported as it passes across the blade.
Cyber Monday DEWALT Bare-Tool DC825B 1/4-Inch 18-Volt Cordless Impact Driver 2011 Deals
Dec 01, 2011 09:33:36
Click for larger image and other views
Cyber Monday DEWALT Bare-Tool DC825B 1/4-Inch 18-Volt Cordless Impact Driver Feature
- Tool only with no battery, frameless motor for extended tool durability and life
- Compact size and weight allows access into tighter areas and reduces user fatigue
- 1,330 in-lbs of torque to perform a wide range of fastening applications
- 0-2,400 rpm/0-2,700 rpm for faster application speed
- Replaceable brushes for increased serviceability; textured anti-slip comfort grip for maximum comfort and control
Cyber Monday DEWALT Bare-Tool DC825B 1/4-Inch 18-Volt Cordless Impact Driver Overview
The DC825 1/4-Inch Heavy-Duty 18V Impact Driver provides a light weight, compact and durable solution for a wide range of light to medium fastening applications. The DC825 offers exceptionally small size, just 5-3/4-Inch front to back and with the battery (not included) weighs only 4.6 lbs. The DC825 has a durable high speed motor that delivers 0-2,400 RPM for increased productivity. The DC825 has a frameless motor technology with replaceable brushes for easy serviceability, is compact in size but high with power and allows for superior airflow which increases motor durability and extended life. The variable speed reversing switch provides control for both setting and removing fasteners. Built-in features include a bright LED work light and onboard bit storage. The DC825 features advanced handle ergonomics and is equipped with a textured anti-slip rubber grip for extended user comfort and productivity. This for the bare tool and does not come with a battery or charger.SAVE NOW on Cyber Monday offers below!
Available In Stock. |
| This Cyber Monday DEWALT Bare-Tool DC825B 1/4-Inch 18-Volt Cordless Impact Driver ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
